产品详情

产品描述

MP 〇转接模块,主要用于将 MPO 主干光缆终端的 12 芯 MPO 连接器分支为单芯或双芯的常规连接器利用单芯或双芯跳线可以直接将模块输出端连接至系统设备输出端口、配线架端口或用户端.此转接模块的特征是单芯或者双芯端口在模块前端,可选择 12  口 SC 单工连接器及 12  口 LC 双工连接器 ,背部安装一个或两个适配器.模块为转接跳线,直接连接模块的前面板与背部适配器.

MPO switching module, mainly used for the MPO trunk cable terminal of the 12 core MPO connector
branch for a single core or dual core of the conventional connector. The use of single core or dual core
patch can be directly to the output end of the module is connected with the system to the output port of
the device, distributing frame port or the client.
Characteristics of the switching module is a single core and double core port at the front end of the
module, can choose 12 SC -x connector and 12 LC duplex connector, back to install one or two

adapters. Transfer module for the jumper, the front panel and the back adapter connection module.

产品应用

将 12 芯 MTP 连接器分支转换到 LC 、 MTRJ 双工连接器或 SC 连接器.
低损耗连接,提供了系统设计灵活性.
前面板装配 LC 、 MTRJ 或 SC 适配器,后面板装配 MPO 适配器.
采用优质工程塑料与铝合金材料,表面静电喷塑,外形美观,方便使用.
MPO 面板可轻松的升级.
所有端口前端均有标号,容易辨识.
方便快捷的安装、配置灵活、便于管理.
Switch 12 core MTP connector to LC, MTRJ duplex connector or SC connector.
Low loss connection provides system design flexibility.
Front panel assembly LC, MTRJ or SC adapter, rear panel assembly MPO adapter.
The quality of engineering plastics and Aluminum Alloy materials, su-ce electrostatic spray, beautiful appearance,
convenient use.
MPO panel can be easily upgraded.
All ports are labeLED, easy to identify.
Convenient and quick installation, flexible configuration, easy to manage.